how to make a snowboard rail with pvc

How to Make a Snowboard Rail with PVC – DIY Methods

Learning how to make a snowboard rail with PVC is a great way of maximizing the sport. Snowboarding is ideal for fitness and having a snowboard rail in your area can give you the advantage of trying and practicing new stunts. What is good about it is that you can execute these movements at the comfort of your home – whether in your front lounge, garden, or wherever you wish to install the rail.

Building a snowboard rail with PVC is an affordable option and it is easy to do, too. It is also easy to assemble, and definitely perfect for learning. In fact, most of the snowboarders with a backyard structure will normally begin with a backyard rail.

If you want to know the steps in making a PVC snowboard rail, this article will feature detailed steps. Later, you will see that this DIY project is both fun and functional!

What Do You Need to Follow this Tutorial?

DIY PVC snowboard rails have been used by many snowboarders. The following tutorial will demonstrate to you the steps for this project. Don’t worry as the instructions are very detailed. However, there is one thing that you need to secure to follow this tutorial, aside from the obvious ones which are the PVC and screws:

  • Circular Saw

You need to prepare a circular saw when doing this tutorial. Obviously, this project involves some cuttings and this is where you will need the circular saw. Although you can use other types of saw to carry out this tutorial, it is best to use the circular saw. Make sure that you know how to operate this tool. You should also know the safety guidelines when using it. You do not have to be an expert to use this tool, though.

Step-by-Step Instructions

1. Cut the PVC into Two 6’ Halfpipes

Image source

Cut the length of the PVC into two, each making a 6-foot halfpipe. You’d want to keep it this way since it is a smooth approach to doubling the length. Moreover, it will also be more manageable to hook it up to the frame. You can use a circular saw to cut the pipe.

Always ensure your safety when cutting the pipe. Set the circular saw to the right depth.

2. Start Building the Support

Image source

You will have to build your supports first. Install the legs with 2 ½-inch screws, and mount two screws between each board. You should begin by having the leg screwed to the foot, aiming at the bottom part. Then, get the support piece and screw it on through the foot and leg.

3. Label the Last 12’ 2 by 4 in the Middle

Image source

Label the last 12’ 2 by 4 in the middle and approximately 12 inches from every end. Following your marking, install the legs by screwing them through the board’s top surface. Now, there is a valid reason why the legs are placed in the center.

You do not typically land or jump from a rail at the very edge. You’d normally allocate 1-2 feet.

4. Mount your Triangle Braces

Image source

Mount your triangle braces by screwing them through the top of the board and the legs. The installation of these braces can give extreme support to the legs. Your rail can be very weak if you do not attach these braces.

These triangle braces are just around 8 inches. However, you may also want to get longer braces if you want to achieve more support.

5. Attach the PVC

Image source

This time, you will attach the PVC. This step can be quite complex. Drill holes on the two sides so you can attach the screws, roughly 18 inches interval, and just a few inches of the edges. 

You will see the holes getting inside the 2 by 4 top edges. This illustration helps in straightening the pipe. The pipe can be gripped and may even break if you directly screw through the sides of your board.

6. Attach the Other Pipe

Image source

See to it that the second PVC is placed lower. Doing so will guarantee your rail to exhibit a specific direction. Position the rail in such a way that your higher PVC is placed at the starting portion of your rail. You will fall around 1/8” toward the other rail.


There you have it! Those are the simple and easy steps on how to make a snowboard rail with PVC. You might realize now how doable this DIY project is and wished to have tried it before. By following the steps, you can now enjoy doing some snowboarding tricks while you are in your backyard – by making a DIY PVC snowboard rail. You must pay attention to the details discussed in the tutorial if you want to come up with a functional snowboard rail.

Leave a Comment

Your email address will not be published. Required fields are marked *