DIY Wrist Guards

DIY Wrist Guards: Easy to Learn Guide?

Ever engaged in a kind of sport such as archery and ended up hurting your wrist as it turns red and feels like burning brought by the bowstring? Have you tried re-altering your hold to keep a distance from the string but realized it didn’t work? Well, there is a practical reason why archers, and other people who participate in relative sports, are wearing wrist guards.

The use of wrist guards will make you feel better rather than uncovering your skin to repetitive hits. If you want to design your wrist guards to make sure that they complement your needs and taste, you may consider making DIY wrist guards.

How to Make DIY Wrist Guards

Making DIY wrist guards can be fun if you have a sincere interest in designing your garment. At first glance, you may think that it is such a big job. Well, it is not that easy, but any beginners can try doing it.

To help you make your DIY wrist guards, we will be discussing some guides that are easily learned. As expected, you will have to secure a few tools, and many of them are available from different stores if you don’t have them available in your home. However, if you intend to do leather designing, then you may opt to advance your tooling from certain major leather stores.

Step 1: Prepare the materials and tools

Before you proceed with the assembly, you have to prepare the materials and tools. So, what are the things that you need to secure in making your DIY wrist guards? For the materials, you will have to prepare the following: leather pieces, leather cement, waxed thread, and two needles, lace lugs, medium rivets, scrap wood, and 1/8 inches bungee cord.

For the tools, make sure that you have the following ready: punch sets, river set, wood mallet, leather edge tool, and leather strip cutter.

Step 2: Putting a Few Chunks

Cut the leather guard from the blueprint pattern of Tandy Leather Archer. After goofing it off, you will notice that it starts to get soft. Cut some black leather strips to facilitate stiffer sides, and create a little volume for the rivets to grasp the lace lug.

The fastening between every lug also contributes a little stiffness. Prepare a black, tear-drop formed leather to provide additional protection over the veins in the wrist.

Step 3: Assemble

After curving the leather using the template, glue the other black pieces to reduce the movement while sewing and punching. The process of gluing is simple if you only do the instructions indicated in the can. 

Try to apply as little glue as possible to avoid overflowing. One way to do it is by allowing the glue to dry to a sleazy state before sticking the two chunks. Nevertheless, see to it that you have everything lined up.

Step 4: Poking Thread Holes 

Allow the glue to dry for a while before engaging in thread poking. Put the scrap wood on the surface of the table. Then, put the leather piece over the wood. You may begin in the center of pieces to poke the holes and do the work to determine the symmetry. It would be useful to get the help of the third hole as a positioning guide for proper spacing. Stitch on first, then poke the thread holes for the lengthy leather strips.

Step 5: Rivet the Lace Lugs

To determine the spacing of the stitches on the topside portion of the guard, position, poke the holes, and initially place the rivets in the lace lug. This consumes around 15 minutes. Ensure that the lower set of the rivet is properly aligned. Else way, you will develop an unusual wrinkle on the lower part of the rivet.

Review the length of the rivet before proceeding to the hammer. It will be helpful to execute a test by employing a material of similar thickness and similar components. If you cannot break them easily, then you can tell that you are the right path.

Step 6: Stitch

Now, stitching together the leather pieces through hand may feel very cumbersome. Nevertheless, it is a crucial task. Run the thread and needle via the first edge hole. Locate the center of the thread, then start wavering the pattern of threading.

Step 7: Bungee Cord

Run the bungee cord in the holes. Suit the wrist guard to the arm. This step may take several attempts before achieving the desired tension.


Wearing wrist guards is important, especially to activities that expose the wrist to risks. Although you can buy these items in any store, it always feels better to use and wear something that you have personally created. 

DIY wrist guards are very doable. With the easy to learn guides, you can do well in this project.

Leave a Comment

Your email address will not be published. Required fields are marked *